Step-by-Step Video Lash Lift & Tint Procedure

Below, you’ll find three detailed video demonstrations to complement your step-by-step guide. The first two videos show a full lash lift and tint demonstration, giving you a clear, start-to-finish view of the treatment in real time (30 minutes each). The third video is a sped-up lash lift and tint demo that highlights each product and demonstrates exactly how to use them (13 minutes). Watching these videos alongside the written guide will give you a complete understanding of both the technique and the tools used.

Step-by-Step Written Lash Lift & Tint Procedure

Once consultation is complete and client suitability is confirmed, follow these professional steps to perform the treatment safely and effectively:

Step 1: Cleanse the Lashes

• Begin by thoroughly cleansing the lashes using an oil-free cleanser or lash shampoo.
• Remove all traces of makeup, mascara, and natural oils.
• Pat dry gently with a cotton pad.
  

💡 A clean surface ensures better lift and tint results, and prevents product from sliding off the lashes.

Step 2: Shield Selection

• Choose the appropriate silicone shield or rod size based on the client’s natural lash length and desired curl.
• Some shields need to be glued on to the clients eyelid with the lash adhesive, in this case apply a thin layer of glue to the back of the shield and place and hold it carefully on the eyelid until it sticks.
  
• Some shields are glue less, in the this case simply place the shield carefully on the eyelid, ensuring it sits just above the lash line without pinching the skin.

💡 Proper shield placement ensures even lift and avoids lashes sticking together.

Step 3: Apply Lash Lifting Adhesive

• Apply a small amount of lash adhesive to the shield or rod, then carefully using a lash tool adhere the lashes onto the shield, aligning them straight and separated.
• Make sure all lashes are smoothly attached and pointing upward.
  

💡 Separating lashes individually prevents clumping and ensures a smooth, natural lift.

Step 4: Apply Lifting Solution

• Apply a thin, even layer of lifting (perm) solution directly onto the lashes using a microbrush. - for TGA products make sure to only apply them from the root to the mid of the lashes, and not the tips.
• Keep the product on the lashes only, avoid contact with the skin or eyes.
• Set the timer according to hair thickness:
  
  • Fine lashes: 6-8 min
  • Medium lashes: 8-10 min
  • Coarse/resistant lashes: 10-12 min
  • (always refer to your manufacturer’s recommended timings)

💡 Check lashes after 2-3 minutes to ensure they are lifting properly; adjust timing as needed to avoid over-processing.

step 5: Optional step

• Cover with cling film if recommended by your brand.
• Or apply lash covers (thin paper or silicone strips) to prevent lashes from pinging off the shield.

Step 6: Remove Lifting Solution

• Gently remove the lifting solution with a dry cotton bud or pad.
• Brush through lashes to ensure they remain separated and aligned.

Step 7: Apply Setting (Neutraliser) Solution

• Apply an even layer of neutraliser to the lashes.
• Keep it on the lashes only, and cover with cling film if recommended.
• Process for the same amount of time as the lifting solution.
  

💡 The neutraliser locks the lashes into their lifted shape and reinforces the curl safely.

Step 8: Tint Preparation

• Mix tint and oxidiser in an dappen dish according to manufacturer instructions and prepare a small applicator or tint brush.
  

💡 Always perform a patch test prior to the first tinting treatment.

Step 9: Remove Neutraliser Solution

• Gently remove the lifting solution with a dry cotton bud or pad.
• Ensure lashes are clean and dry before moving on to the next step.

Step 10: Apply Lash Tint

• Carefully apply tint from base to tip, avoiding skin contact.
• Processing time: 3-10 minutes depending on lash thickness, natural colour, and desired intensity.
  

💡 Watch closely to prevent over-darkening or staining the eyelid skin.

Step 11: Remove Tint

• Gently wipe off tint with a dry cotton bud.
• Once all the tint you can get off with a dry cotton bud is off, dampen a cotton bud with step 3 nourishing serum and gentle wipe over the lashes until all the lashes are unstuck from the shield.
• Brush through lashes to ensure they are separated and even.
  

💡 Assess colour and symmetry, and touch up if needed with a tiny amount of tint.

Step 12: Remove Shields & Cleanse Lashes

• Carefully peel off the silicone shields or rods.
• Remove any residual adhesive or product from the lash line using a gentle cleanser.
  

💡 Take care not to pull on lashes; this protects natural lash integrity.

Step 13: Apply Nourishing Serum / Oil

• Apply a lash conditioning serum or nourishing oil to replenish moisture.
• Brush through lashes gently with a clean spoolie to align them.
  

💡 Conditioning supports lash strength and helps prolong lift and tint results.

Step 14: Aftercare Advice

• Advise clients on first 24-48 hour precautions:
  
  • Avoid water, steam, or eye makeup
  • Do not rub or pull lashes
  • Avoid oil-based cleansers on lashes
    
• Explain long-term maintenance:
  
  • Comb lashes gently daily
  • Apply lash serum if recommended
  • Rebook lift & tint every 6-8 weeks

💡 Offer printed aftercare cards or set up automated reminders via your booking system.

*Full aftercare and maintenance are covered in the next module.

Lash Lift & Tint Complete! Clients leave with beautifully curled, defined lashes that can last up to 6-8 weeks with proper care.

Key Recap:
Always follow manufacturer instructions and recommended timings. Tailor shield/rod size and processing times to lash type. Use optional extras (lash covers, tinting) to enhance results. Aftercare is essential for long-lasting lifts and happy client.